Trouver Ascenseur Passager, Ascenseur à La Maison, Pesage D'ascenseur dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine

Panier (0)

Les dernières alertes produit

Ascenseur Ascenseur

Informations de base

Modèle: Standard Config

Description du produit

Ascenseur ascenseur de vente de tourisme Fonction standard
VVVF Drive Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort.
VVVF Door Operator Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop.
Independent Running The lift can not respond to outer calling, but only respond to the command inside the car through the action switch.
Automatic Pass Without Stop When the car is crowded with passengers or the load is close to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency.
Automatically Adjust Door Opening Time Door-open time can be automatically adjusted according to the difference between landing calling or car calling.
Re-open with Hall Call In the door shutting process, press reopen with hall call button can restart the door.
Express Door Closing When the lift stops and opens the door, press door-shut button, the door will be closed immediately.
Car Stops and Door Open The lift decelerates and levels, the door only opens after the lift comes to a complete stop.
Command Register Cancel If you press the wrong floor command button in the car, twice continous pressing of same button can cancel the registered command.
Direct Parking It compeletely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency.
Lighting Screen Protection In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.
Designated Stop If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor.
Overload Holding Stop When the car is overload, the buzzer rings and stops the lift in the same floor.
Anti-stall Time Protection The lift stops operation due to slippery taction wire rope.
Start Protection Control If the lift does not leave door zone within the designated time after it gets started, it will stop the operation.
Inspection Operation When the lift enters into inspection operation, the car travels at inching running.
Fault Self-diagnosis The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation.
Repeated Door Closing If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated.
Up/down Over-run and Final Limit Protection The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of the control. It results in the more safe and reliable lift travel.
Down Over-speed Protection When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety.
Upward Over-speed Protection Device When the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift.
Micro-touch Button for Car Call and Hall Call Novel micro-touch button is used for operational panel command button in the car and landing calling button.
Floor and Direction Indicator Inside Car The cars shows the lift floor location and current travel direction.
Floor and Direction Indicator Hall The landing shows the lift floor location and current travel direction.
Emergency Car Lighting Emergency car lighting automatically activated once power failure.
Inching Running When the lift enters into emergency electric operation, the car travels at low speed inching running.
Five Way Intercom Communication amid car, car top, lift machine room and rescue duty room through walkie-talkie.
Bell In emergency conditions, if bell button above car operation is continuously pressed, eletric bell rings on the top of the car.
Fire Return If you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift directly and immediately drives to the designated rescue landing and automatically opens the door.
Car Light Automatic Shut-off If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy.
Locking Return The lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service.
Profil de l'entreprise 1.Shaanxi Sanjin Ascenseur Fittings Co., Ltd est une grande entreprise de pièces d'ascenseur. Depuis la société établie, réaliser le rêve du travailleur est la base, pour répondre à la demande des clients est le but.Tous les membres travaillent dur par coeur réel pour son Au cours de la communication avec les clients, ils gagnent chaque sourire de client par leur foi et travail acharné., Pendant ce temps ils obtiennent un grand plaisir de l'âme. 2.Nous avons maintenant la valeur USD 6,000,000 pcs pièces d'ascenseur en stock avec 4000 types.qui est unique en Chine. \ NPièces de rechange (carte, bouton poussoir, commutateur, outil de service, inverseur, ...) \ nKone pièces de rechange (PCB, DRIVE, moteur de porte,) \ nMitsubishi pièces de rechange \ nLG / sigma pièces de rechange \ nSchindler pièces d'ascenseur \ nFuji ascenseur pièces, et ainsi de suite. Termes commerciaux 1. Chaque partie est incluse dans un emballage en carton ondulé. Nous emballons soigneusement toutes les pièces. 2. Type de paiement ---- TT / Western Union / L / C / Paypal / Aliexpress 3.a.Par air (DHL / Fedex / TNT / UPS / EMS) \ n b.Par l'information de service de mer 1. Nous pouvons fournir le meilleur service pour les clients. 2. Nous devons envoyer les marchandises au client à l'heure. Nous ne retardons jamais la date de livraison. 3. Nous avons promis que si nos produits ont un problème, nous allons changer les marchandises pour les clients et nous payons le fret. L'honneur d'entreprise Nous reviendrons vers vous! Votre satisfaction est notre motivation de travail!

Groupes de Produits : Ascenseurs et escalators